BannerForAboutPage

OUR SERVICES

General Servicing
Bicycle Hitch Receivers.
Ignition Coil Upgrades.

From custom bicycle hitch receivers and comprehensive car servicing to premium ignition coils, explore more ways to care for your vehicle at Jeep Chee Garage.

01 / BICYCLE HICH RECEIVERS

Custom Bicycle Hitch Receivers —
Fabricated to Fit Your Vehicle

Looking for a bicycle rack in Singapore that's actually built for your car, not just bolted onto it? At Jeep Chee Garage, we don't sell generic hitch receivers off the shelf. Every bicycle hitch receiver we produce is custom fabricated from scratch, based on precise measurements taken directly off your vehicle.

Enquire Now

01 / BICYCLE HICH RECEIVERS

Custom Bicycle Hitch Receivers —
Fabricated to Fit Your Vehicle

Hitch Image

Looking for a bicycle rack in Singapore that's actually built for your car, not just bolted onto it? At Jeep Chee Garage, we don't sell generic hitch receivers off the shelf. Every bicycle hitch receiver we produce is custom fabricated from scratch, based on precise measurements taken directly off your vehicle.

Enquire Now
Hitch Image

How we custom fabricate your
hitch receiver

Rather than adapting a mass-produced tow hitch to fit whatever car it lands on, we start with your vehicle's actual dimensions. We measure the bumper profile, the mounting points, and — critically — the position of your crash bar, before we fabricate anything.

This means the finished vehicle bike rack in Singapore sits flush against your bumper, with no gaps, no rattling, and no awkward overhang.

01 — Precise vehicle measurements 02 — Custom fabrication 03 — Removable bolt-on construction 04 — Customised carrying requirements

Our design is fully bolt-on — no drilling, welding, or permanent modification to your vehicle. This means the entire hitch receiver can be removed or reinstalled whenever you need, whether that's for a car wash, servicing, or simply when you're not carrying a bike. Your vehicle stays exactly as it was, with no permanent damage or lasting trace once the receiver is taken off.

If you're planning on cycling trips that call for carrying more than a single bike, or you need to tow a bicycle trailer, we can further customise the build to handle a heavier ferrying load — reinforcing the structure so it's rated for what you actually intend to carry, not just a generic weight limit.

Why fabricating around the crash bar matters

Hitch Image

This is the part many generic bicycle rack installation jobs get wrong. Your crash bar exists for one reason: to absorb impact and protect the rest of your vehicle's structure in a collision. A hitch receiver that's welded or bolted on without accounting for the crash bar's position can interfere with how that crash bar is meant to deform and absorb energy — which means in an accident, the safety system you're relying on may not perform the way it was designed to.

Some cheaper or mass-produced bicycle hitch receiver setups are fabricated purely around the bumper shape, with no consideration for what's structurally behind it. It looks fine when the bicycle carrier is empty, but the receiver may be sitting directly against or interfering with the crash bar — compromising the exact safety feature it was meant to leave alone.

Because we custom fabricate every hitch to your vehicle's actual specifications, we build around the crash bar deliberately — not through it, not against it — so your vehicle's factory safety performance stays intact even with a bicycle rack permanently fitted, and our bolt-on design means you're never left with permanent modifications to your car.

Hitch Image

Ideal For

Cyclists who want a properly fitted, removable bike rack.

Riders carrying multiple bicycles or a bicycle trailer.

Drivers who want installation without permanent modifications.

Banner for General

02 / GENERAL SERVICING

General Car Servicing at
Jeep Chee Garage

Keep Your Car.
At Its Best.

Regular car servicing is one of the most overlooked ways to protect your vehicle and your wallet. A well-maintained engine runs more efficiently, a fresh transmission fluid protects your gearbox from premature wear, and catching small issues early means avoiding the far costlier car repair and servicing bills that come from neglect.

Beyond suspension and brakes, we offer complete servicing packages to keep your car running the way it should.

Basic Servicing Package
EXN Engine Flush Cleaner and Optimizer Pro
Comprehensive Servicing Package
Brake Fluid Flushing
Why Regular Servicing Matters
Basic Servicing Package

ROUTINE MAINTENANCE / 01

Basic Package

—

$168

  • Engine Oil + Oil Filter
  • EXN Super Engine Flush Cleaner
  • EXN Engine Optimizer Pro
  • Tyre Rotation
  • Air Con Gas

A solid choice for routine maintenance — keeping your engine clean, your tyres wearing evenly, and your air-con performing through Singapore's heat.

EXN Engine Flush Cleaner and Optimizer Pro

ROUTINE MAINTENANCE / 02

EXN Engine Care

  • 2-step engine treatment — flush first, then protect
  • Cleans sludge, varnish, carbon deposits and residual buildup
  • Promotes cleaner oil flow and stable oil circulation
  • Reduces friction and metal-to-metal contact
  • Strengthens lubrication and protects critical engine components
  • Supports cleaner oil flow, reduced friction, wear protection and smoother performance

EXN Super Engine Flush Cleaner removes internal deposits so fresh oil can work effectively, while EXN Engine Optimizer Pro reinforces lubrication and wear protection. Together, they help maintain a cleaner, smoother and better-protected engine.

Comprehensive Servicing Package

ROUTINE MAINTENANCE / 03

Comprehensive Package

—

$388

  • Engine oil / oil filter change
  • EXN super engine flush cleaner
  • EXN Optimizer Pro
  • Tyre rotation
  • Air con gas top-up
  • Brake fluid flush and top-up with Motul DOT4
  • EXN coolant flush and fill
  • EXN CVT/ATF treatment

For drivers who want a full reset across the car's key systems — not just the engine, but your braking, cooling, and transmission systems too. Flushing brake fluid regularly (using quality fluid like Motul DOT4) keeps your braking system responsive and is a key part of maintaining safe stopping power alongside routine brake pad replacement, since old, moisture-contaminated brake fluid can quietly reduce brake performance over time. 

Brake Fluid Flushing

ROUTINE MAINTENANCE / 04

Brake Fluid Flushing

  • Maintains stable pressure for consistent fluid exchange
  • Provides a cleaner and more thorough flushing process
  • Helps remove old and contaminated brake fluid
  • Reduces the risk of air entering the braking system
  • Supports better braking feel and consistency

Machine flushing uses a controlled, pump-assisted process to replace old brake fluid more consistently than traditional manual bleeding, helping maintain cleaner fluid, stable pressure and more confident braking.

Why Regular Servicing Matters

ROUTINE MAINTENANCE / 05

Why Regular Servicing Matters

  • Maintains better lubrication and reduces engine wear
  • Controls sludge and harmful deposit buildup
  • Helps maintain a lower operating temperature
  • Supports stronger fuel efficiency and engine response
  • Extends component life and improves long-term reliability
  • Promotes safer and more consistent driving performance

Regular servicing helps prevent excessive engine wear, sludge buildup, overheating, poor fuel economy and unexpected component failure. As a general guide, service every 8,000–10,000 km or according to your vehicle manufacturer's recommended schedule.

PREVENTIVE CARE / LONGEVITY

Why regular servicing
matters

Servicing isn't just an oil change — it's preventive care. Engine flushes remove built-up sludge that causes long-term wear, coolant flushes prevent overheating, and transmission treatments keep shifting smooth. Skipping these doesn't save money — it shifts the cost forward, often turning a simple service into a much bigger car repair and servicing job down the line.

Regular Service Image

01 / ENGINE

Regular Service Image

02 / BRAKES

Regular Service Image

03 / TRANSMISSION

Regular Service Image

04 / SUSPENSION

Pairing regular servicing with timely brake pad replacement and suspension checks is the most cost-effective way to keep your car safe and reliable for years to come.

Engine Service

01 / ENGINE

Brake Service

02 / BRAKES

Transmission Service

03 / TRANSMISSION

Suspension Service

04 / SUSPENSION

Previous
Next

Pairing regular servicing with timely brake pad replacement and suspension checks is the most cost-effective way to keep your car safe and reliable for years to come.

Banner for High Spark

03 / HIGHSPARK IGNITION COILS

Reliable Ignition Engineered
for Performance

Japanese Engineering.
OEM-Grade Quality.

Your ignition coil takes the low voltage from your car's battery and steps it up into the high voltage needed to fire the spark plug. Every combustion cycle in your engine depends on a clean, strong spark at exactly the right moment.

A weak or failing coil doesn't always cause an obvious breakdown — more often it shows up as misfires, rough idling, hesitation under acceleration, poor fuel economy, or a check engine light that keeps coming back. 

Ignition Coils

What Ignition Coils do

Your ignition coil takes the low voltage from your car's battery and steps it up into the high voltage needed to fire the spark plug. Every combustion cycle in your engine depends on a clean, strong spark at exactly the right moment. A weak or failing coil doesn't always cause an obvious breakdown — more often it shows up as misfires, rough idling, hesitation under acceleration, poor fuel economy, or a check engine light that keeps coming back.

LOW VOLTAGE HIGH VOLTAGE CLEAN SPARK
Ignition Coils

Why Made in Japan matters

Ignition coils are one of those parts where manufacturing precision genuinely affects performance. The winding quality, insulation, and heat resistance inside a coil determine how consistently it delivers spark voltage over time and under engine bay heat. Highspark's Japan manufacturing focuses on that consistency — coils that perform reliably in daily driving conditions without the voltage drop-off or early failure that's common in lower-grade replacements. 

PRECISION STABLE OUTPUT HEAT RESISTANCE
Ignition Coils

Why Replace Ignition Coils as a set 

Coils tend to wear at a similar rate since they're exposed to the same heat cycles and mileage. Replacing only the failed coil while leaving the others in a similar state of wear often means you're back in the workshop again shortly after for the next one to go.

We generally recommend replacing coils as a full set for consistent performance across all cylinders. Ideal for: Drivers experiencing misfires, rough idle, or reduced fuel efficiency, and anyone looking to replace worn factory coils with a reliable, Japan-made alternative rather than a generic aftermarket unit. 

CONSISTENCY BALANCED
OUTPUT FULL-SET
REPLACEMENT
Ignition Coils

What Ignition Coils do

Your ignition coil takes the low voltage from your car's battery and steps it up into the high voltage needed to fire the spark plug. Every combustion cycle in your engine depends on a clean, strong spark at exactly the right moment. A weak or failing coil doesn't always cause an obvious breakdown — more often it shows up as misfires, rough idling, hesitation under acceleration, poor fuel economy, or a check engine light that keeps coming back.

LOW VOLTAGE HIGH VOLTAGE CLEAN SPARK
Ignition Coils

Why Made in Japan matters

Ignition coils are one of those parts where manufacturing precision genuinely affects performance. The winding quality, insulation, and heat resistance inside a coil determine how consistently it delivers spark voltage over time and under engine bay heat. Highspark's Japan manufacturing focuses on that consistency — coils that perform reliably in daily driving conditions without the voltage drop-off or early failure that's common in lower-grade replacements.

PRECISION STABLE OUTPUT HEAT RESISTANCE
Ignition Coils

Why Replace Ignition Coils as a set

Coils tend to wear at a similar rate since they're exposed to the same heat cycles and mileage. Replacing only the failed coil while leaving the others in a similar state of wear often means you're back in the workshop again shortly after for the next one to go.

We generally recommend replacing coils as a full set for consistent performance across all cylinders. Ideal for: Drivers experiencing misfires, rough idle, or reduced fuel efficiency, and anyone looking to replace worn factory coils with a reliable, Japan-made alternative rather than a generic aftermarket unit.

CONSISTENCY BALANCED
OUTPUT FULL-SET
REPLACEMENT

Ideal For

Drivers experiencing misfires, rough idle, or reduced fuel efficiency, and anyone looking to replace worn factory coils with a reliable, Japan-made alternative rather than a generic aftermarket unit.

Ideal For

Drivers experiencing misfires, rough idle, or reduced fuel efficiency, and anyone looking to replace worn factory coils with a reliable, Japan-made alternative rather than a generic aftermarket unit.

MOTVE Car parts

Not Sure What
Your Car Needs?

Talk to our team and we'll advise the right solution for your vehicle.

Talk To Our Team